Ru-33 Recording Telemetry Unit
| |
The Ru-33 provides real-time monitoring and alarming of instruments and
sensors found in the harsh environment of sewers and underground water
vaults. Using a single, 6-volt lantern battery for power, the unit is
capable of automatically monitoring level, flow, pressure and water
quality. Data is forwarded wirelessly to a host computer operating Telog
host application software.
|
Ru-33 Features and Details
Ru-33 Recording Telemetry Unit
Wireless RTU for underground monitoring.
Directly Monitor:
- Popular open-channel wastewater flowmeters
- Pressure level sensors
- Ultrasonic level sensors
- Water quality sensors and Sondes
Communicate Via:
- Local connection
- Cellular
- Land-line telephone
Powered By:
-
6V Lantern battery
- External DC
Other Features:
-
Alarm notification
- Two year battery life
- Burial antenna option
- Submersible enclosure
- Web application software

|
|

Telog’s
Ru-33 Recording Telemetry Unit, (RTU), provides real-time monitoring and alarming of instruments and sensors found in the harsh environment of sewers and underground water vaults.
The Ru-33 has low power requirements and automatically monitors level, flow, pressure and water quality sensors. Data is forwarded wirelessly to a host computer operating Telog host application software, Telogers for Windows or Telog Enterprise. Data communication may be scheduled frequently (e.g. daily, hourly, every five minutes, etc.) and/or immediately in response to site alarm conditions.
The Ru-33 supports multiple sensor interface options including RS-232, RS-485, analog and digital inputs. For example, when connected to an open-channel flowmeter via RS-232, the RTU can interrogate the meter for it’s most recent level, flow velocity and battery voltage measurements.
Telog also provides optional sensors that may be directly attached to the Ru-33 including ultrasonic and pressure level, water quality Sondes, pH and conductivity, temperature, level switches and a rain gauge.
Wireless communication is supported via packet switched (e.g. 1xRTT) or circuit switched (e.g. CDMA) cellular. An optional burial antenna may be embedded in the street pavement producing a complete underground wireless monitoring solution.
The RTU is powered from a single, 6-volt lantern battery providing an operating life of six months to two years depending on sensor interface and call schedule.
Try our Telogers Enterprise Software:

|
Recorder
Model: Telog Ru-33
Type: Multi- channel underground
RTU (Recording Telemetry
Unit)
Recording
Sample rate: Programmable from 1/Sec up to 8
hours each
channel Data interval: Programmable from 1/sec up to 8
hours each
channel
Memory
Size: 512 Kbytes Storage method: Wrap around (first-in;
first-out) Data capacity: Dynamically allocated to active
channels, any
combination of: Analog input:270,000 values Pulse input: 200,000 values Event input: 67,000 values ComSensor input: 100,000 values
Communication:
Standard: local RS-232, 4 pin circular connector rated IP-67, auto-selected baud rate to 19.2K Optional: Land line telephone; Telog M-324 2400 baud modem; Auto-dial/Auto answer; FCC and CSA approved | Cellular data modem; Provides both 1xRTT packet switched and CDMA circuit switched data.
Inputs: Limited to one ComSensor + one analog + one digital
ComSensor/meter: Selectable RS-232 or RS-485 to 19.2 Kbaud. Protocol determined by meter or sensor. Analog: Selectable ranges: 0-1 VDC, 0-5 VDC, 4-20 ma | Excitation: Pulsed +5 or +12 VDC, (selectable duration) | Resolution: ±0.025%; 12 bits/Accuracy: 0.1% of full range at 25ºC ±50 ppm
Digital (one channel): Type: Selectable pulse counter or even recorder | Input: Contact closure or logic driven input | Excitation: 5 VDC at 20 µAmps (max) | Pulse width: 10 mS minimum
Battery
Factory installed: Single 6V alkaline lantern battery, Eveready Energizer model 529
Battery Life Example
Input ComSensor: Sigma 900 series flow meter with 1xRTT wireless communication and sampling rate of 5 minutes. The battery life for this unit with the following call schedules will be: 5 minutes = 1 month/15 minutes = 3 months/2 hours = 1 year/24 hours = 2 years.
External Power Input
Enclosure
Size: Cylindrical 4.5" x 15.4" | Weight: 7 lbs | Material PVC
Environmental
Temperature: 0 - 70º C
Submersible: IP67 (NEMA 6)
Support Software
S-3PC: Telogers for Windows
S-3EP: Telogers Enterprise
Data transfer unit: IP-78 rated PDA running Palm OS and Telog application program
Supported Sensors
Pressure Level Sensor: Submersible pressure sensor
Model: Telog PMP-1030
Ranges: 0-5 PSI thru 0-3-- PSI
Accuracy: ±0.25% of full scale
Construction: 316 stainless steel
Vent: In-line dry box with user replaceable desiccant
Ultrasonic Level Sensor: Ultrasonic transmitter (ComSensor)
Model: Massa M5000/95
Frequency: 95 KHz
Range: one foot to 13 feet
Beam Angle: 8º conical
Accuracy: ±0.25% over any range segment exceeding 12 inches (homogeneous environment)
Temperature Sensor
Model: AT-3u ambient temperature sensor
Range: -20 to +70º C
Accuracy ±0.2º C
Size: Stainless steel probe (4" x ¼") with three meters of cable
pH Sensor
Model: ISI pHS-M11tc
Type: Double junction reference cell (KCI/AgCl and KNO3)
Range: 0-14 pH
Output: ±59.16 mV/pH unit @ 25º C; Pre-amplified and temperature compensated. Includes internal lithium battery.
Telog Supplied Meters & Sensors
|
|
Ru-33 Support Meters & Sensors
|
 |
Ultrasonic Sensor |
|
Flowmeters
-
Via RS-232 or RS-485 interface to meter serial
interface port
|
- Hach Sigma Series
-
ISCO 2150
-
Marsh McBirney Flo-Dar & Flo
Tote3 Meters
-
MGD ADFM & accQmin
-
ADS Flowshark
|
 |
pH Sensor |
|
Water Quality |
- Hach Hydrolab Multiparameter Sondes
-
DataSonde 4a, MiniSonde 4a
-
DSSX,
DSS, MSS
-
Hach WDM Pipe Sonde
|
 |
Pressure Sensor |
|
|
|
 |
Temperature Sensor |
|
|
|
| |
Rain Guage |
|
|
|
 |
Burial Antenna
- Antenna installed in the road for wireless communication option.
|
|
|
|
| |
Pole Mount Antenna |
|
|
|
|
Yagi Antenna |
|
|
|
Download the Ru-33 brochure. |